Logo to STL
Logo to STL — badges, stamps, and relief drafts
Looking for a logo to STL converter? PhotoSTL pairs AI image to 3D with a dedicated Logo relief recipe: millimeter scale, flat on the bed, optional base plate, then STL or 3MF for your slicer. 30 free credits (≈3 drafts) when you sign in (Google or magic link).
Logo file → printable draft
A logo is usually a flat mark — solid fills and hard edges, sometimes with alpha. Extrude-only tools thicken that outline into a 2.5D plate. PhotoSTL still generates a mesh via image to 3D, then applies print prep aimed at badges and stamps. Use a clean PNG when you can; JPG works if compression is light.
How it works
- Open the generator with the Logo relief recipe preselected.
- Upload your logo image (PNG / JPG / WebP).
- Generate (~30 seconds typical), set height in mm, download STL or 3MF.
- In the slicer, confirm letter openings and first-layer adhesion before a production run.
Logo prep that saves reprints
- Solid fills beat thin outlined strokes at small scale.
- Drop soft shadows and photo backgrounds.
- Plan final size so features stay ≥ ~0.8 mm with a 0.4 mm nozzle.
- Need a full 3D figurine instead of a badge? Use miniature from photo or general object — not logo relief.
FAQ
Can I convert a logo to STL for 3D printing?
Yes. On photostl.com use the Logo relief print recipe, upload a high-contrast logo (PNG preferred), generate, then download STL or 3MF with millimeter scale and an optional base plate. 30 free credits (≈3 drafts) when you sign in (Google or magic link).
Is this a silhouette extrude or AI reconstruction?
PhotoSTL runs AI image to 3D with a logo-oriented print recipe (thin plate, flatten to bed, optional base) — not a pure vector cookie-cutter extrude. For razor-flat 2.5D signs from SVG paths, a dedicated extrude tool may still be better; for a quick printable badge draft from a PNG/JPG logo, start here.
What logo file works best?
High-contrast artwork on a plain or transparent background. Avoid tiny text thinner than ~1 mm after scaling. Prefer PNG over heavily compressed JPG so edges stay sharp.
Can I print the logo as a coaster or stamp?
Yes as a draft: set target height in mm, download STL/3MF, then tune walls and first-layer settings in your slicer. Treat outputs as drafts — check that letter counters open cleanly before a long print.